Vorsprung Luftkappe Air Piston Kit Ilmamäntä
Heti toimitettavissa ja noudettavissa!
Luftkappe on ilmamäntä, joka tekee saman keulalle, mitä Corset-lisäosa teki takaiskarille eli suurentaa ilmajousen negatiivisen puolen tilavuutta. Suurempi negatiivinen ilmajousi parantaa alkuherkkyyttä ja tekee ilmajousesta lineaarisemman, parantaen samalla myös keskialueen kantavuutta.
Make a good fork a great fork.
Taking everything we learned with the Corset air sleeves, the Luftkappe is a new air piston assembly that enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork.
 |
|
COMPATIBILITY:
|
Dual Position Air (DPA) forks of any year |
Not Compatible |
|
Rockshox Pike / Revelation < 2014 |
Not Compatible |
|
Rockshox Pike / Revelation 2014 (Solo Air) all wheel sizes |
LK - A1 |
|
Rockshox Pike / Revelation 2015 (Solo Air) all wheel sizes |
LK - A1 |
|
Rockshox Pike / Revelation 2016 (Solo Air) all wheel sizes |
LK - A1 |
|
Rockshox Pike / Revelation 2017 (Solo Air) all wheel sizes |
LK - A1 |
|
Rockshox Pike / Revelation 2018 - Debonair ONLY - all wheel sizes |
LK - A2 |
|
Rockshox Pike / Revelation 2019-2022 (Debonair) all wheel sizes |
In order to fit a Luftkappe to a MY2019+ Pike / Revelation, you will need to remove the MY2019+ air shaft assembly and retrofit the previous generation Solo Air spring shaft (available separately - not through our web store). Rockshox part numbers are as follows: |
|
Rockshox Pike / Revelation 2023 |
Not Compatible |
|
Rockshox Lyrik / Yari < 2015 |
Not Compatible |
|
Rockshox Lyrik / Yari 2016 (Solo Air) all wheel sizes |
LK - A1 |
|
Rockshox Lyrik / Yari 2017 (Solo Air) all wheel sizes |
LK - A1 |
|
Rockshox Lyrik / Yari 2018 - Solo Air & Debonair - all wheel sizes |
LK - A1 |
|
Rockshox Lyrik / Yari 2019-2022 (Debonair) all wheel sizes |
LK - A1 + Airshaft (Solo Air) In order to fit a Luftkappe to a MY2019+ fork, you will need to remove the MY2019+ air shaft assembly and retrofit the previous generation Solo Air spring shaft (available separately - not through our web store). Rockshox part numbers are as follows: 11.4018.026.001 - Air Shaft Solo Air - Lyrik/Yari (150mm) 11.4018.026.004 - Air Shaft Solo Air - Lyrik/Yari (160mm) 11.4018.026.002 - Air Shaft Solo Air - Lyrik/Yari (170mm) 11.4018.026.020 - Air Shaft Solo Air - Lyrik B1/Yari (180mm) |
|
Rockshox Lyrik / Yari 2023 |
Not Compatible |
|
Rockshox Boxxer (all years) |
Not Compatible |
|
Rockshox Zeb 2021 |
LK-ZEB |
|
Rockshox Zeb 2022 |
LK-ZEB |
|
Rockshox Zeb 2023 |
Requires 2021-22 air shaft to use LK-ZEB, 2023 air shafts not compatible. |
|
Rockshox Domain 2022 |
LK-DM |
|
Fox Talas forks |
Not Compatible |
|
Fox 32 (all years) |
Not Compatible |
|
Fox 34 <2016 |
Not Compatible |
|
Fox 34 2016 (Float NA2) - Performance & Factory Series - 120mm & lower |
Need 2018 EVOL airshaft, use LK-34/38EVOL |
|
Fox 34 2016 (Float NA2) - Performance & Factory Series - More than 130mm |
LK-34NA (discontinued) |
|
Fox 34 2017 (Float NA2) - Performance & Factory Series - More than 130mm |
LK-34NA (discontinued) |
|
Fox 34 2018-21 (Float NA2 Evol) - Performance & Factory Series - 27.5" (all travels) and 29" (140mm and lower only) |
LK-34/38EVOL |
|
Fox 34 2018-2022 (Float NA2 Evol) - Performance & Factory Series - 29" (150mm and higher) |
Not Compatible |
|
Fox 34 2022 |
LK-34/38EVOL |
|
Fox 34 Stepcast 2019-2021 |
LK-34/38EVOL |
|
Fox 34 Stepcast 2022 |
Not Compatible |
|
Fox 36 <2015 |
Not Compatible |
|
Fox 36 2015 (Float NA) - Performance & Factory Series |
LK-36NA |
|
Fox 36 2016 (Float NA) - Performance & Factory Series |
LK-36NA |
|
Fox 36 2017 (Float NA) - Performance & Factory Series |
LK-36NA |
|
Fox 36 2018+ (Float NA2 Evol) - Performance & Factory Series |
LK-36EVOL Note: If your MY2018 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. For 2019 onwards, Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. |
|
Fox 36 (Float NA2 Evol) E-bike Specific [SPD-PED-ELEC] |
Note that this fork usually requires the 34 Float NA2 Evol Luftkappe due to its thicker stanchions having a smaller ID. Exceptions exist - eg some Giant e-bikes, which use the 36 Float NA2 Evol Luftkappe as they are standard 36s despite the e-bike stickers on the fork. |
|
Fox 38 (2021+) |
LK-34/38EVOL |
|
Fox 40 |
Not Compatible |
|
Fox Rhythm Series forks |
Not Compatible |
|
Marzocchi Z1 |
Not Compatible |
Tälle tuotteelle ei ole vielä annettu arvosteluita.
